Axel AX3000 65 User's Manual Manual do Utilizador descarregar pdf (Página 23)

Initial Power-On

AX3000 - User's Manual 11

Example of the quick set-up menu:

Quick set-up parameters:

- Keyboard: keyboard nationality. The value given is immediately enabled.

- Screen Type: possible values are CRT Monitor or TFT Flat Screen.

- Session Type: possible values are "Text Emulations", "IBM5250",

"IBM3270", "RDP 5", "ICA", "CITRIX Desktop" or "VNC".

- Emulation: only available if "Text Emulations" is selected.

- Enable DHCP: two possible values:

- yes: the DHCP protocol is run when the set-up is exited. The

DHCP function is automatically set to obtain the AX3000 IP

address and various other required DHCP options (netmask,

default router, etc).

- no: IP parameters must be manually entered.

- AX3000 IP address: mandatory if DHCP is disabled.

- Default router: optional router IP address.

- 1st DNS Server IP Address: optional DNS server IP address

- AX3000 Name (FQDN): this optional parameter (see appendix A.4)

allows the AX3000 to be identified by this name but only if both a DHCP

server and a Dynamic DNS server are available. (The default value is AX

followed by the last 3 bytes of the MAC address).

- Host Name: if the IP address of the host is not given, this name is

resolved by DNS (if a DNS server is given).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 275 276

Sem comentários

Axel AX3000 65 User's Manual Manual do Utilizador Página 23