Axel AX3000 70W Installation Guide Manual do Utilizador

AX3000 Platine Terminal Ethernet TCP/IP Models 70 Installation Guide January 2012 - Ref: I70E0826-1 Model AX3000/M70 Type EA

Installation 2.2 - INSTALLATION 2.2.1 - Mounting the Terminal on a Flat Screen The terminal had been designed to be mounted on the flat screen: this

Installation b) Hooking the Terminal Hook the terminal to the bracket, matching the hooks with the corresponding holes: Installation Guide - Models

Installation c) Using the Terminal The terminal is now ready to be used. The cables can be connected on the read panel (at the bottom). And the powe

Installation a) The Monitor Plug in the VGA monitor cable to the 'SVGA' connector on the terminal rear panel. Note: when the terminal is i

Installation 8 Installation Guide - Models 70 e) Other USB Devices AX3000 Model 70 has two USB ports as a standard feature. These ports are located

Initial Power-On 3 - INITIAL POWER-ON This chapter describes the initial power-on procedure for the M70 terminal. When the terminal is switched on up

Initial Power-On The dialog box structure (referred to as a Wizard) is shown below: Network Connection (TCP/IP session) Printer (text 5250 or 3270

Initial Power-On Installation Guide - Models 70 11 intervention. There are also options to specify various terminal specific parameters, for exampl

Connector Pin Assignments 4 - CONNECTOR PIN ASSIGNMENTS This chapter describes the connector pin assignments for the different ports of the AX3000 M

Connector Pin Assignments 4.2 - KEYBOARD INTERFACE The AX3000 keyboard interface is a Mini-DIN connector. To connect a keyboard which has a DIN conn

The reproduction of this material, in part or whole, is strictly prohibited. For additional information, please contact: 14 Avenue du Québec Bât. K

Connector Pin Assignments 4.4 - VIDEO INTERFACE The AX3000 video interface is VGA and SVGA compatible: 5 4 3 2 110 9 8 7 615 14 13 12 11 VGA/SVGA co

Connector Pin Assignments Installation Guide - Models 70 15 4.5 - USB PORTS AX3000 Models 70 are equipped with two USB ports located on the termin

Problem Solving 5 - PROBLEM SOLVING This chapter describes some of the problems that may occur during installation of the AX3000 Models 70, and offe

Problem Solving Installation Guide - Models 70 17 This signal indicates that keyboard initialization has failed. Check the keyboard connection to t

14 Avenue du Québec Bât. K2 EVOLIC - BP 728 91962 Courtabœuf cedex - FRANCE Tel.: 33 1.69.28.27.27 Fax: 33 1.69.28.8

1 - NOTICES...1 1.1 - SAFETY NOTICES...

The AXEL AX3000 Terminal is based on a modular concept. The AX3000 is designed and manufactured by Axel. The terminal's electronics is conta

Notices 1 - NOTICES 1.1 - SAFETY NOTICES  Do not attempt to fix an AX3000 component failure by opening the terminal case. In case of hardware failur

Notices 2 Installation Guide - Models 70 and on, the user is encouraged to try to correct the interference by one or more of the following measures

Installation 2 - INSTALLATION This chapter provides information and instructions to install the Axel Terminal. 2.1 - DESCRIPTION Rear Panel: Front P