Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manual do Utilizador

AXEL Platine Terminal AX3000 Models 65, 70 and 75 USER'S MANUAL March 2008 - Ref.: AX3E/0632-7

8.5 - USING THE AX3000...192 8.5.1 - Opening a Windows Session ...

Installing under UNIX/LINUX 86 AX3000 - User's Manual To program a new key (or to modify an existing one) select the sequence number and pres

Installing under UNIX/LINUX AX3000 - User's Manual 87 a) Standard Colouring Mode The dialog box for the standard colouring mode is: The avai

Installing under UNIX/LINUX 88 AX3000 - User's Manual The dialog box for enhanced colouring mode is: Colouring mode parameters: - Blink allo

Installing under UNIX/LINUX AX3000 - User's Manual 89 To set a colouring attribute, select and press <CR>. The following dialog box app

Installing under UNIX/LINUX 90 AX3000 - User's Manual The benefit of this method is that the colouring mode is specific to a single session.

Installing under UNIX/LINUX AX3000 - User's Manual 91 These parameters are: - TERM Value (telnet and ssh protocols). The value of this envir

Installing under UNIX/LINUX 92 AX3000 - User's Manual ‘Connection Properties’ box, select the "Login Script" parameter. The login s

Installing under UNIX/LINUX AX3000 - User's Manual 93 running the AXEL tcpmsh program from a UNIX shell. This supports up to eight duplicated

Installing under UNIX/LINUX 94 AX3000 - User's Manual - b 2: using ttypx, ttyqx, ttyrx and ttysx (x is any hexadecimal value from 0 to F). -

Installing under UNIX/LINUX AX3000 - User's Manual 95 5.2 - GRAPHICAL MODE SESSION (VNC) The VNC protocol enables a remote graphical display

a) The Horizontal General Menu...221 b) Vertical Menus ...

Installing under UNIX/LINUX 96 AX3000 - User's Manual - Session Type: select 'VNC' - Server: the server name on which the Xvnc daem

Installing under UNIX/LINUX AX3000 - User's Manual 97 These parameters are: - Auto-Connection: if this parameter is set to 'yes',

Installing under UNIX/LINUX 98 AX3000 - User's Manual - ZRLE: newer and higher performing encoding but is only supported by a RealVNC server

Installing under UNIX/LINUX AX3000 - User's Manual 99 - ASCII: keyboard events are the same than the top row keys (above QWERTY). With this m

Installing under UNIX/LINUX 100 AX3000 - User's Manual folder. b) Analyzing Linux After being launched AxGVNC automatically checks the Linux

Installing under UNIX/LINUX AX3000 - User's Manual 101 c) Configuring VNC Terminals The following dialog box is displayed: Two methods are a

Installing under UNIX/LINUX 102 AX3000 - User's Manual Click the tab corresponding to the preferred method and add VNC terminals. (The Linux

Installing under UNIX/LINUX AX3000 - User's Manual 103 Each auxiliary port using the tty protocol (see Chapter 3.5.4) is identified by the na

Installing under UNIX/LINUX 104 AX3000 - User's Manual a) Using lpd under IBM AIX V3.x Enter the SMIT fast path smit mkrque. Four parameters

Installing under UNIX/LINUX AX3000 - User's Manual 105 c) Using lpd under SCO UNIX Run scoadmin and select [Printer]-[Printer Manager]. Then

A.6.1 - Overview ...255 A.6.2 - Adding an Axel option with the Mi

Installing under UNIX/LINUX 106 AX3000 - User's Manual Note: the default printer port is also used to perform local printing of the screen us

Installing under UNIX/LINUX AX3000 - User's Manual 107 The following drawing shows the Unix/Linux mechanisms: SocketTCP StackAXELtty serverAX

Installing under UNIX/LINUX 108 AX3000 - User's Manual 5.4.3 - Using an AXEL tty server a) Overview The AXEL tty server uses a configuration

Installing under UNIX/LINUX AX3000 - User's Manual 109 b) Running the Axel Tty Server The command to start the AXEL tty server is: /etc/axtty

Installing under UNIX/LINUX 110 AX3000 - User's Manual 5.4.5 - Uninstalling Remove the AXEL files and kill the AXEL tty server process (signa

Installing under UNIX/LINUX AX3000 - User's Manual 111 is available free on the Axel Web site. See Chapter 8.8.2. The following rsh commands

Installing under UNIX/LINUX 112 AX3000 - User's Manual or a partial set-up can also be obtained (only used set-up parameters are sent): # rsh

Installing under UNIX/LINUX AX3000 - User's Manual 113 Messages are displayed on the target AX3000 (See Chapter 11.4). f) Viewing AX3000 Sta

Installing under OS/400 AX3000 - User's Manual 115 CHAPTER 6 --- INSTALLING UNDER OS/400

d) The 'Time to Live' Parameter...275 e) The 'TCP port Assignment' Param

Installing under OS/400 116 AX3000 - User's Manual This chapter covers AX3000 installation under OS/400. This chapter describes the operation

Installing under OS/400 AX3000 - User's Manual 117 [Configuration]-[Advanced]-[Tuning] menu. Set the "Keyboard Type" to "PC&qu

Installing under OS/400 118 AX3000 - User's Manual - Auto-Logon: press <Space> to set the Auto-Signon function (see Chapter 6.1.4). - T

Installing under OS/400 AX3000 - User's Manual 119 a) 5250 Emulation General Parameters Within the 'Session Profile' box, select &a

Installing under OS/400 120 AX3000 - User's Manual - Caps Lock +: same as 'Shift Lock'. But in addition ALL the keys supported (inc

Installing under OS/400 AX3000 - User's Manual 121 - Yes, hexa: data is encoded only in hexadecimal notation. - On/Off ASCII Sequence: start

Installing under OS/400 122 AX3000 - User's Manual 6.1.4 - Setting-Up the Auto-Signon Function Within the 'Session Profile' box, se

Installing under OS/400 AX3000 - User's Manual 123 These parameters are: - TERM Value: terminal capabilities. Default value is IBM-3477-FC.

Installing under OS/400 124 AX3000 - User's Manual The status symbols are described in the following table. Symbol Name Meaning ] System Ava

Installing under OS/400 AX3000 - User's Manual 125 6.2.2 - Using the Keyboard Two types of keyboard can be used with the AX3000: a PC/AT (102

Installing under OS/400 126 AX3000 - User's Manual Axel Functions: Axel Function 5250 Keyboard PC/AT Keyboard AX3000 Shutdown <Rest&g

Installing under OS/400 AX3000 - User's Manual 127 Example: 1 - Press <Alt Gr><F4> to set the Record mode. The 5250 status line

Installing under OS/400 128 AX3000 - User's Manual 6.2.4 - The Mouse Note: the mouse must be enabled. See Chapter 6.1.3. Four mouse actions a

Installing under OS/400 AX3000 - User's Manual 129 a) Start and Stop Sequence Enable the transparent mode and select the start and stop sequ

Installing under OS/400 130 AX3000 - User's Manual Example 1: Screen session, character mode When this EBCDIC data is received: @%@1/1Bat/2F@

Installing under OS/400 AX3000 - User's Manual 131 These printers can be controlled by one of two protocols: - Prt5250: this service (RFC 287

Installing under OS/400 132 AX3000 - User's Manual These parameters are: - Server: the server to which the AX3000 opens a printer connection

Installing under OS/400 AX3000 - User's Manual 133 b) Advanced Settings Within the Prt5250 box select "Enhanced Parameters" and pre

Installing under OS/400 134 AX3000 - User's Manual A printer handled through the Prt5250 service is seen as a standard spooled OS/400 printer

Installing under OS/400 AX3000 - User's Manual 135 - 8928 (Change of device failed): during the printer modification operation (reconnection

Introduction AX3000 - User's Manual 1 INTRODUCTION

Installing under OS/400 136 AX3000 - User's Manual 6.4 - REMOTE ADMINISTRATION 6.4.1 - Remote Control This functionality allows an administra

Installing under OS/400 AX3000 - User's Manual 137 The supported resources are: - Screen sessions: SESS1, SESS2... - Auxiliary ports: AUX1, A

Installing under OS/400 138 AX3000 - User's Manual For more information about this command, refer to Chapter 10. e) Downloading a Firmware To

Installing under OS/400 AX3000 - User's Manual 139 6.5.2 - Reconnection Problem If an AX3000 5250 session is set with a specific DEVNAME, pro

Installing under OS/390 AX3000 - User's Manual 141 CHAPTER 7 --- INSTALLING UNDER OS/390

Installing under OS/390 142 AX3000 - User's Manual This chapter covers AX3000 installation under OS/390 zSeries. This chapter is dedicated to

Installing under OS/390 AX3000 - User's Manual 143 7.1.1 - Setting a Session To set a profile session, enter the AX3000 Set-Up and select the

Installing under OS/390 144 AX3000 - User's Manual of parameters control 3270 emulation settings: - General Parameters: 3270 emulation behavi

Installing under OS/390 AX3000 - User's Manual 145 - Rulers Palette: pressing <Space> displays a dialog box which lets rule colours be

Introduction 2 AX3000 - User's Manual This manual provides details on terminal operation, maintenance and set-up. The manual is organized i

Installing under OS/390 146 AX3000 - User's Manual b) Remapping 3270 Functions to any PC Keyboard keys Select "User Defined Sequences&qu

Installing under OS/390 AX3000 - User's Manual 147 7.1.3 - Connection Properties Within the 'Session Profile' box, select 'Con

Installing under OS/390 148 AX3000 - User's Manual The 3270 status line is displayed at the bottom of the screen and gives the following info

Installing under OS/390 AX3000 - User's Manual 149 Mode Symbols Symbol Meaning © <Shift> is currently pressed or the keyboard is in Cap

Installing under OS/390 150 AX3000 - User's Manual The following table lists the other useful keys: 3270 Functions PC/AT keyboard Fast curso

Installing under OS/390 AX3000 - User's Manual 151 The recorded data is stored in non-volatile memory so is not affected by switching off. R

Installing under OS/390 152 AX3000 - User's Manual b) Processing a Key Sequence To execute a series of keystrokes that have been recorded: -

Installing under OS/390 AX3000 - User's Manual 153 To set the Prt3270 service, enter the AX3000 Set-Up and select [Configuration]-[Aux. Ports

Installing under OS/390 154 AX3000 - User's Manual The administrator can passively watch the users screen or actively take control with his o

Installing under Windows AX3000 - User's Manual 155 CHAPTER 8 --- INSTALLING UNDER WINDOWS

Introduction AX3000 - User's Manual 3 Chapter 8: Installing under Windows Description of Windows specific features. Chapter 9: Tools and Stat

Installing under Windows 156 AX3000 - User's Manual This chapter covers AX3000 installation under Windows This chapter describes the operatio

Installing under Windows AX3000 - User's Manual 157 8.1.1 - Setting-Up an RDP Session To set an RDP session, enter the AX3000 Set-Up and sele

Installing under Windows 158 AX3000 - User's Manual - Additional Parameters: pressing <Space> displays a dialog box, which lets certain

Installing under Windows AX3000 - User's Manual 159 - Mouse Accelerator: if 'yes', the AX3000 speeds up the mouse cursor. - Server

Installing under Windows 160 AX3000 - User's Manual Example: %SystemRoot%\system32\cmd.exe - Working Directory (available only if 'Au

Installing under Windows AX3000 - User's Manual 161 Select the dialog box of the 'Connection port' (menu [Configuration]-[Ports]-[x

Installing under Windows 162 AX3000 - User's Manual sub-section c). b) Declaring a Redirected COM Port On RDP/ICA connection a redirected COM

Installing under Windows AX3000 - User's Manual 163 These parameters are: - Port Name: redirect COM port name (from COM1 to COM255). - DSR S

Installing under Windows 164 AX3000 - User's Manual - None - COMx (port): these are the COM port name(s). This allows the selection of only o

Installing under Windows AX3000 - User's Manual 165 - Mouse Events Reported: the options are: - All (default): all mouse events (clicks and p

Installing under Windows 166 AX3000 - User's Manual These parameters are: - Auto-Connection: if this parameter is set to 'yes', th

Installing under Windows AX3000 - User's Manual 167 Note: for "Citrix Desktop" see Chapter 8.3. - ICA Browser Settings (only for

Installing under Windows 168 AX3000 - User's Manual - Server (local list): this is a server previously entered through the menu [Configuratio

Installing under Windows AX3000 - User's Manual 169 - TCP Port: with "HTTP + TCP/IP" mode, the default value is 80 and can be modi

Installing under Windows 170 AX3000 - User's Manual 8.2.3 - ICA Additional Parameters Within the 'Session Profile' box, select &apo

Installing under Windows AX3000 - User's Manual 171 8.2.4 - Automatic Logon and Auto-Run Within the 'Session Profile' box, select &

Installing under Windows 172 AX3000 - User's Manual terminal's user. They are created on the Windows server when the connection is estab

Installing under Windows AX3000 - User's Manual 173 Set the 'Active' parameter to 'As Printer' or 'As Printer and CO

Installing under Windows 174 AX3000 - User's Manual Select the dialog box of the 'Connection port' (menu [Configuration]-[Ports]-[x

Installing under Windows AX3000 - User's Manual 175 c) Redirecting Resources within the ICA session To redirect resources within a session se

Introduction to the AX3000 AX3000 - User's Manual 5 CHAPTER 1 --- INTRODUCTION TO THE AX3000

Installing under Windows 176 AX3000 - User's Manual d) Remapping a COM port Terminal COM ports must be remapped to server COM ports. The rema

Installing under Windows AX3000 - User's Manual 177 - Mouse Sensitivity: This setting varies the sample rate of the mouse. If the sensitivity

Installing under Windows 178 AX3000 - User's Manual The Citrix Desktop session is comparable in functionality to the Citrix product Nfuse, WE

Installing under Windows AX3000 - User's Manual 179 - Within the Citrix Desktop dialogue box the number of Citrix published applications is s

Installing under Windows 180 AX3000 - User's Manual To configure the Citrix Desktop session, enter (<Ctrl><Alt><Esc>), sele

Installing under Windows AX3000 - User's Manual 181 - Logon Authentication: press spacebar to show a dialogue box permitting the user’s name

Installing under Windows 182 AX3000 - User's Manual 8.3.2 - Using the Citrix Desktop a) Connection On establishing the Citrix Desktop, authen

Installing under Windows AX3000 - User's Manual 183 b) Using the Desktop After authentication the user is given a standard graphical interfac

Installing under Windows 184 AX3000 - User's Manual General ICA Session Information: - A new ICA connection becomes the current session. -

Installing under Windows AX3000 - User's Manual 185 When this utility is run the dialog box below is displayed: Select 'Connections&apo

The reproduction of this material, in part or whole, is strictly prohibited. For additional information, please contact: 14 Avenue du Québec Bât.

Introduction to the AX3000 6 AX3000 - User's Manual This chapter introduces the main features of the AXEL TCP/IP terminal. 1.1 - TERMINAL MOD

Installing under Windows 186 AX3000 - User's Manual Note: despite its name low encryption level is a satisfactory security level in most case

Installing under Windows AX3000 - User's Manual 187 'General' tab. The same dialog box than RDP protocol is displayed. Set the &apo

Installing under Windows 188 AX3000 - User's Manual 8.4.3 - Idle Session Limit When the AX3000 is powered off without logging out, the curren

Installing under Windows AX3000 - User's Manual 189 over lunch time). Take care to set an appropriate delay for the terminal’s use. 8.4.4 -

Installing under Windows 190 AX3000 - User's Manual 8.4.5 - Allowing Blank Passwords with Windows 2003 By default, with a Windows 2003 server

Installing under Windows AX3000 - User's Manual 191 a) On Windows TSE By default, with a Windows 2003 server, the time zone redirection is di

Installing under Windows 192 AX3000 - User's Manual When this utility is run, a dialog box as shown below is displayed: On the left panel, s

Installing under Windows AX3000 - User's Manual 193 session. When the session is established, the value of certain parameters can be re-negot

Installing under Windows 194 AX3000 - User's Manual c) Disconnect by the AX3000 The <Ctrl><Alt><Shift><D> keystroke

Installing under Windows AX3000 - User's Manual 195 3. The Windows server doesn't convert a temporary license to a 'standard'

Introduction to the AX3000 AX3000 - User's Manual 7 1.2.2 - Terminal Function Each TCP/IP AXEL terminal can support up to six concurrent and

Installing under Windows 196 AX3000 - User's Manual - The printer dataflow can be compressed. - The display and printer data flows are multip

Installing under Windows AX3000 - User's Manual 197 Click on 'Next'. Note: if 'LPR Port' is not available, you need to in

Installing under Windows 198 AX3000 - User's Manual Example of 'Menu': the menu is displayed in the centre of the screen. Example

Installing under Windows AX3000 - User's Manual 199 various support or administration purposes. The following diagram clarifies the concept

Installing under Windows 200 AX3000 - User's Manual - Obtaining network and device statistics - Obtaining set-up configuration - Rebooting

Tools and Statistics AX3000 - User's Manual 201 CHAPTER 9 --- TOOLS AND STATISTICS

Tools and Statistics 202 AX3000 - User's Manual This chapter describes the embedded AX3000 tools. The AX3000 provides the following features:

Tools and Statistics AX3000 - User's Manual 203 Select the [Diagnostics]-[Connections] dialog to check the status of all defined connections:

Tools and Statistics 204 AX3000 - User's Manual For each auxiliary port, the following information is displayed: - Port: the name of the port

Tools and Statistics AX3000 - User's Manual 205 9.3.1 - Ethernet Statistics The following information is displayed: Correct Frames: "O

Tools and Statistics 206 AX3000 - User's Manual 9.3.2 - Interface Statistics The following information is displayed: In the above dialog box

Tools and Statistics AX3000 - User's Manual 207 - Status: the possible update values are: - None: no update (not requested) - Done: update su

Tools and Statistics 208 AX3000 - User's Manual Description of the information given within this box: - Who: AX3000 resource involved in the

Remote Administration AX3000 - User's Manual 209 CHAPTER 10 --- REMOTE ADMINISTRATION

Remote Administration 210 AX3000 - User's Manual This chapter covers remote administration of the TCP/IP AX3000. Three types of operations ar

Remote Administration AX3000 - User's Manual 211 10.1.1 - Configuring To set-up the remote control function, select the menu [Configuration]-[

Remote Administration 212 AX3000 - User's Manual - Screen size: 80x25 - Scrolling mode disabled Notes: - To disable the telnet set-up, set t

Remote Administration AX3000 - User's Manual 213 AX3000 must already have been set 10.3.1 - AX3000 Remote Set-Up To set-up an AX3000 remotely

Remote Administration 214 AX3000 - User's Manual 'setup_get' command (or 'setup_get_lite' command). This command sends a

Remote Administration AX3000 - User's Manual 215 ERR 103: trailer label not found. Default factory set-up reloaded Command: setup_send Cause

Initial Power-On AX3000 - User's Manual 9 CHAPTER 2 --- INITIAL POWER-ON

Remote Administration 216 AX3000 - User's Manual ERR 113: password required Command: setup_send, ax_reboot and ax_download Cause: the AX300

Remote Administration AX3000 - User's Manual 217 ERR 203: xxx: no place to store udk value. Command: setup_send Cause: not enough memory to

Remote Administration 218 AX3000 - User's Manual Solution: check the number of sessions and pages. ERR 214: Associate host not found. Assoc

Appendix AX3000 - User's Manual 219 APPENDIX

Appendix 220 AX3000 - User's Manual The following appendices give information about: A.1 - Using the AX3000 interactive set-up A.2 - Network

Appendix AX3000 - User's Manual 221 Note: the set-up can be password-protected, in which case the password must be entered to access the quick

Appendix 222 AX3000 - User's Manual b) Vertical Menus Move through vertical menus with vertical arrow keys. Confirm the selected command by p

Appendix AX3000 - User's Manual 223 During this mode the following keys are enabled: - <CR>: confirmation - <Esc>: abandon your ch

Appendix 224 AX3000 - User's Manual A.2 - NETWORK OVERVIEW A.2.1 - Ethernet Addresses AX3000 terminals (like other devices equipped for Ether

Appendix AX3000 - User's Manual 225 For example: an AX3000 connected, over a network, to a host with an IP address 192.1.168.40 (class C: thre

Initial Power-On 10 AX3000 - User's Manual This chapter describes the 'Quick Set-Up' feature and the 'Auto-Configuration'

Appendix 226 AX3000 - User's Manual Example 1: router 1 is used to reach the 192.168.2.xxx network and router 2 is used to reach the 192.1.1.

Appendix AX3000 - User's Manual 227 Example 2: router 1 is used to reach both networks (192.168.2.xxx and 192.1.1.xxx): AX3000Router 1192.168.

Appendix 228 AX3000 - User's Manual addresses and other network parameters to terminals and PCs when they are powered on. This can greatly si

Appendix AX3000 - User's Manual 229 A.3.3 - Using the AX3000 If the DHCP protocol is enabled the AX3000 automatically requests an IP address o

Appendix 230 AX3000 - User's Manual b) Re-negotiation Failure The lease time must be regularly re-negotiated (except if the IP address has be

Appendix AX3000 - User's Manual 231 A.4.1 - Overview A domain (computer network) can be considered as a tree, with branches (nodes) such as hu

Appendix 232 AX3000 - User's Manual A.4.2 - Resolving a Name a) Resolution Strategy To resolve a name, a DNS request is sent by the AX3000.

Appendix AX3000 - User's Manual 233 - linux: an IP address is associated. No DNS resolution. - www.axel.com: this is a full name. The resoluti

Appendix 234 AX3000 - User's Manual Two DNS Servers: 1 - A DNS request is sent to the server 1. 2 - In event of no response from server 1, t

Appendix AX3000 - User's Manual 235 In the event of a problem, the "Resolved: a.b.c.d" message is replaced by an error message. For

Initial Power-On AX3000 - User's Manual 11 The dialog box structure (referred to as a Wizard) is shown below: Note: the following keystrokes a

Appendix 236 AX3000 - User's Manual the type ("direct" or "direct / reverse") and the result (success or failure) of the

Appendix AX3000 - User's Manual 237 A.5 - REMOTE SET-UP CONFIGURATION FILE FORMAT A configuration file can list some or all AX3000 set-up para

Appendix 238 AX3000 - User's Manual 8-colour format: the 8 available colours are black, red, green, brown, blue, magenta, cyan and white. 16

Appendix AX3000 - User's Manual 239 Substitution Commands axname_encoding_string= (yes | no) Enabling "axname_encoding_string" all

Appendix 240 AX3000 - User's Manual Ethernet Parameters ethernet_link= (Auto-sense | 10BT HD | 10BT FD | 100BT HD | 100BT FD) ethernet_

Appendix AX3000 - User's Manual 241 tcp_remoteCtrl_password= (character string, 5 char max.) tcp_remoteCtrl_see=no (no | colors | overscan |

Appendix 242 AX3000 - User's Manual aux%_associate_msgqlib=*LIBL (character string, 10 char max.) aux%_associate_font=11 (character string,

Appendix AX3000 - User's Manual 243 aux%_dtr_init (high | low) aux%_rts_init (high | low) aux%_tx_fifo=yes (yes | no) aux%_seq= (charact

Appendix 244 AX3000 - User's Manual parallel_operating_mode= (optimised |standard) parallel_sup_signals= (none | select | paper | both) c) U

Appendix AX3000 - User's Manual 245 usb%_associate_pprsrc2= (character string, 10 char max.) usb%_associate_envelope= (character string, 10

Initial Power-On 12 AX3000 - User's Manual 2.1.1 - First Screen This first screen allows the session type to be selected: These parameters a

Appendix 246 AX3000 - User's Manual net%_associate_font=11 (character string, 10 char max.) net%_associate_mfrtypmdl= (character string, 10

Appendix AX3000 - User's Manual 247 e) Service Table Note: Depending on the associated service, some parameters can be inactive. They are unma

Appendix 248 AX3000 - User's Manual #term_operating_mode=tcp/ip (tcp/ip | serial) term_language=french (french | english) term_screen=CRT-s

Appendix AX3000 - User's Manual 249 term_autoconf_port= (number) term_gmt=+00:00 (GMT format +-hh:mm) term_gmt_name=Greenwich (character str

Appendix 250 AX3000 - User's Manual Session Parameters In the following section of the file, for ease of reading the session number (1 to 6)

Appendix AX3000 - User's Manual 251 s%_tcp_window=1024 (number) s%_tcp_mss=512 (number) s%_tcp_ttl=64 (number) s%_tcp_setport=random (ramdom

Appendix 252 AX3000 - User's Manual s%_fctn_transp= (yes | yes-hexa) s%_fctn_transp-seq= (character string, 4 char max.) s%_fctn_typeahead=

Appendix AX3000 - User's Manual 253 s%_rdp_bckg= (disabled| enabled) s%_rdp_wincontent= (disabled| enabled) s%_rdp_animation= (disabled| enabl

Appendix 254 AX3000 - User's Manual s%_graphics_foregrnd=hi-white (16-colour format) s%_graphics_backgrnd=magenta (8-colour format) #s%_enhan

Appendix AX3000 - User's Manual 255 - When the configuration file is obtained from an already configured AX3000, non significant parameters ar

Initial Power-On AX3000 - User's Manual 13 2.1.2 - Network Connection The Network dialog box is the following: These parameters are: - Enabl

Appendix 256 AX3000 - User's Manual conflicting number in this range can be used. For more information on the Axel options see chapter A.6.3

Appendix AX3000 - User's Manual 257 Click ‘OK’ to exit this box and 'OK' again to exit the former box. 3 - In the left panel select

Appendix 258 AX3000 - User's Manual The parameters are: - The IP address or DNS name of the AxRM server - The TCP port AxRM is listening on H

Appendix AX3000 - User's Manual 259 table): # arp -s a.b.c.d xx:xx:xx:xx:xx:xx Run a ping command: $ ping a.b.c.d The first ping requests ar

Appendix 260 AX3000 - User's Manual The following table lists the available AX3000 administration commands: Command Description ax_reboot Re

Appendix AX3000 - User's Manual 261 Firmware can be downloaded in one of two ways: - tftp protocol: the operator must enter the location of th

Appendix 262 AX3000 - User's Manual tftp dgram udp nowait nobody /usr/sbin/tftpd tftpd -n UNIXWARE 7 tftp dgram udp wait nobody /usr/sbin/in.

Appendix AX3000 - User's Manual 263 4 - Change the file "/axfirm/ax3000" QTFTP user's rights: ===> CHGAUT OBJ('/axfirm/

Appendix 264 AX3000 - User's Manual Example for Unix/Linux: # rsh ax3001 ax_download password /usr/firm 192.168.1.249 The message 'Down

Appendix AX3000 - User's Manual 265 Enter the following parameters: - Protocol: select tftp, - Filename: path and name of the firmware file, b

Initial Power-On 14 AX3000 - User's Manual 2.1.3 - Graphical Display and Printer This box is displayed for the following session types TSE, V

Appendix 266 AX3000 - User's Manual The main capabilities of the bootpd configuration file are as follows: - tc: network description - ht: n

Appendix AX3000 - User's Manual 267 The message 'Download in progress...' will be displayed on the operator’s console if downloading

Appendix 268 AX3000 - User's Manual Next, an automatic connection to the tftp host will then be made, in order to download the firmware file.

Appendix AX3000 - User's Manual 269 a) The bootp Stage If an error occurs, the following message is displayed on the AX3000 monitor: Bootp err

Appendix 270 AX3000 - User's Manual Tftp AX3000 Errors: tftp errno: xxx - xxx is the error number. Possible errors: 10: Ethernet board not r

Appendix AX3000 - User's Manual 271 A.10.2 - General Level: Advanced Parameters This chapter describes special AX3000 operating parameters. Us

Appendix 272 AX3000 - User's Manual c) The 'Link' Parameter The AX3000 10/100 network port is set by default as auto-sense. But it

Appendix AX3000 - User's Manual 273 g) The 'Administrator Hot-Keys disabled' Parameter This parameter allows certain AX3000 hot-keys

Appendix 274 AX3000 - User's Manual disabled. Note: the FIFO modification takes immediately effect. k) The 'Number of Sessions" Par

Appendix AX3000 - User's Manual 275 Notes: - The available parameters depend on both the connection type (screen or auxiliary port) and the a

Initial Power-On AX3000 - User's Manual 15 2.1.4 - Citrix Desktop For session type 'Citrix (ica)' with the connection type 'Cit

Appendix 276 AX3000 - User's Manual The TCP port assignment can be either random or fixed. The default value depends on the current network s

Appendix AX3000 - User's Manual 277 In event of network incident, the AX3000 is able to detect this incident and to close the related TCP/IP c

Appendix 278 AX3000 - User's Manual Arabic - United Arab Emirates 3801 Italian - Italy 0410 Arabic - Bahrain 3C01 Italian - Switz

Appendix AX3000 - User's Manual 279 English - Ireland 1809 Spanish - Honduras 480A English - Jamaica 2009 Spanish - Mexico 080A

Appendix 280 AX3000 - User's Manual following: 1. Use the AxRM utility - "Get Terminal Information" command, 2. Enter the AX3000

Appendix AX3000 - User's Manual 281 A.11.2 - Firmware Information The firmware version is FCT.NA.yywwi:STD - FCT is the AX3000 operating mode

PERSONAL NOTES

14 Avenue du Québec Bât. K2 EVOLIC - BP 728 91962 Courtabœuf cedex - FRANCE Tel.: 33 1.69.28.27.27 - Fax: 33 1.69

TABLE OF CONTENT INTRODUCTION ... 1 1 - INTRODUCTION

Initial Power-On 16 AX3000 - User's Manual 2.1.5 - Citrix (Published Application or Server) For the session type 'Citrix (ica)' wit

Initial Power-On AX3000 - User's Manual 17 2.1.6 - Serial Connection Where the session type is 'Text Emulation' and connection typ

Initial Power-On 18 AX3000 - User's Manual 2.1.7 - Set-Up Summarize At the end of the wizard process, a summary of the selected settings is d

Initial Power-On AX3000 - User's Manual 19 Auto-configuration is supported by the M65c and all M75 based products. Note: the auto-configuratio

Initial Power-On 20 AX3000 - User's Manual 2.2.3 - Stage 3: Sending requests to AxRM After obtaining an IP address via DHCP negotiation the t

Initial Power-On AX3000 - User's Manual 21 Method 3: If "axrmserv" cannot be resolved, as a final attempt the terminal assumes AxRM

Initial Power-On 22 AX3000 - User's Manual The dialog box is as shown: AUTO-CONFIGURATION Network detection...

Initial Power-On AX3000 - User's Manual 23 Note: if the firmware is updated the new version is displayed. After the configuration file is rece

Interactive Set-Up AX3000 - User's Manual 25 CHAPTER 3 --- INTERACTIVE SET-UP

a) DNS Servers ...29 b) DNS Domains ...

Interactive Set-Up 26 AX3000 - User's Manual This chapter describes AX3000 installation using the interactive set-up procedure. The following

Interactive Set-Up AX3000 - User's Manual 27 - Appendix A.2: Ethernet addresses, IP addresses, net masks and routers, - Appendix A.3: DHCP pro

Interactive Set-Up 28 AX3000 - User's Manual below is displayed: The parameters of the DHCP Enhanced Box are: - Lease Time (minutes): lease

Interactive Set-Up AX3000 - User's Manual 29 is empty, the name won't be registered. The name registration can be performed by the DHCP s

Interactive Set-Up 30 AX3000 - User's Manual b) DNS Domains A DNS domain can be used to resolve a server name or to register the terminal nam

Interactive Set-Up AX3000 - User's Manual 31 To configure the server table, select the [Configuration]-[TCP/IP]-[Servers] menu. A dialog box a

Interactive Set-Up 32 AX3000 - User's Manual which enables data to be sent across two or more distinct physical networks. One router can be n

Interactive Set-Up AX3000 - User's Manual 33 3.2 - GENERAL SETTINGS 3.2.1 - The Keyboard Select the [Configuration]-[General]-[Keyboard] menu

Interactive Set-Up 34 AX3000 - User's Manual 3.2.2 - The Screen Select the [Configuration]-[General]-[Screen] menu to access the following di

Interactive Set-Up AX3000 - User's Manual 35 3.2.3 - The Display Select the [Configuration]-[General]-[Display] menu to access the following d

3.4.11 - Listing Connected USB Devices ... 49 3.5 - SETTING AUXILIARY AND LOGICAL PORTS ...

Interactive Set-Up 36 AX3000 - User's Manual 3.2.4 - RDP/ICA Select the [Configuration]-[General]-[RDP/ICA] menu to access settings specific

Interactive Set-Up AX3000 - User's Manual 37 b) Time Redirection The terminal negotiates its own local time zone. This allows different ‘loca

Interactive Set-Up 38 AX3000 - User's Manual The RDP/ICA Keyboard parameters are: - Nationality: two possible values: - Default: the keyboard

Interactive Set-Up AX3000 - User's Manual 39 b) Touch Screens "Touch screen events" are automatically remapped into "mouse even

Interactive Set-Up 40 AX3000 - User's Manual Double Touch Accuracy Range (pixels): this parameter defines a zone size which allows double-cli

Interactive Set-Up AX3000 - User's Manual 41 3.3.1 - "TSE (rdp)" or "Citrix (Ica)" Session Type Graphical mode session for

Interactive Set-Up 42 AX3000 - User's Manual In the [Configuration]-[Sessions] menu, select the source session and press <Ctrl><C>

Interactive Set-Up AX3000 - User's Manual 43 Maximum number of connected USB devices: - Two keyboards and barcode readers, - Two mice, - Two H

Interactive Set-Up 44 AX3000 - User's Manual 3.4.6 - Connecting a Printer a) Logical Port Attachment When a USB printer is connected for the

Interactive Set-Up AX3000 - User's Manual 45 In the menu [Configuration]-[Ports]-[USB Logical Ports] select the logical port and press <Ent

5.1.2 - Protocols: telnet, tty, ssh or aux1/aux2 ...77 a) The TELNET Protocol...

Interactive Set-Up 46 AX3000 - User's Manual b) Configuration A logical USB port is allocated to the USB-RS232 adaptor. (See attaching and re

Interactive Set-Up AX3000 - User's Manual 47 Most USB mass storage devices fall in one of the categories below: - memory sticks, - hard

Interactive Set-Up 48 AX3000 - User's Manual This function is designed for PC/SC-compliant smartcard readers. Two readers are supported by th

Interactive Set-Up AX3000 - User's Manual 49 - IFD Type: character string sent back by the terminal when a SCardGetAttrib (option SCARD_ATTR_

Interactive Set-Up 50 AX3000 - User's Manual 3.5 - SETTING AUXILIARY AND LOGICAL PORTS Three types of ports are available for peripheral devi

Interactive Set-Up AX3000 - User's Manual 51 Select the [Configuration]-[Ports]-[Auxiliary Ports]-[AuxX] dialog box to configure each auxiliar

Interactive Set-Up 52 AX3000 - User's Manual - Speed: selected from a list (from 300 to 115,200 bits per second). - Format: data format is se

Interactive Set-Up AX3000 - User's Manual 53 adaptor. Example of a dialog box for a USB printer: Example of a dialog box for a USB-RS232 adap

Interactive Set-Up 54 AX3000 - User's Manual d) Setting TCP Logical Ports Select the [Configuration]-[Ports]-[TCP Logical Ports]-[NetX] dialo

Interactive Set-Up AX3000 - User's Manual 55 The embedded LPD print server allows the remote printer to be accessed as a standard system print

5.4.1 - Overview...106 5.4.2 - Installing an AXEL tty server ...

Interactive Set-Up 56 AX3000 - User's Manual 3.5.3 - Connecting a Serial Terminal Two serial terminals can be attached to the AX3000’s serial

Interactive Set-Up AX3000 - User's Manual 57 3.5.4 - Connecting other Peripherals The Unix/Linux tty service provides bi-directional control o

Interactive Set-Up 58 AX3000 - User's Manual 3.5.6 - Other Uses a) Using rtty With the rtty service, the AX3000 acts as a server. The AX3000

Interactive Set-Up AX3000 - User's Manual 59 b) Using the rsh Command to Print The embedded rcmd service allows printing with the rsh command

Interactive Set-Up 60 AX3000 - User's Manual 3.6.1 - Multi-Session Keystroke The keystrokes to move from one session to another can be custom

Interactive Set-Up AX3000 - User's Manual 61 Note about mass storage devices: - When a mass storage device is currently in use, a colored indi

Interactive Set-Up 62 AX3000 - User's Manual b) Entering Set-Up If the set-up is password protected, the following dialog box will be display

Interactive Set-Up AX3000 - User's Manual 63 The 'time-out' parameter is the maximum number of seconds allowed for the terminal to

Using the AX3000 AX3000 - User's Manual 65 CHAPTER 4 --- USING THE AX3000

d) Examples ...129 e) Handling DTR and RTS Signals ...

Using the AX3000 66 AX3000 - User's Manual This chapter covers use of the AX3000. 4.1 - TURNING ON THE AX3000 The following operations are pe

Using the AX3000 AX3000 - User's Manual 67 4.1.1 - Session Manager: Classic Mode This is the appearance of the classic mode: The following i

Using the AX3000 68 AX3000 - User's Manual 4.1.2 - Session Manager: Desktop Mode This is the appearance of the Desktop Mode: The following i

Using the AX3000 AX3000 - User's Manual 69 The session icons are displayed below: TSE ICA Citrix Desktop VNC 5250 3270 Text Emu

Using the AX3000 70 AX3000 - User's Manual If the user closes the current session (<Ctrl><D> on UNIX) the behaviour of the AX3000

Using the AX3000 AX3000 - User's Manual 71 - Resetting the AX3000. If the password is forgotten, the only way is selecting the [Shutdown] but

Using the AX3000 72 AX3000 - User's Manual a) Copy From a Windows Session (RDP or ICA): Use the standard 'Copy' function. For exam

Using the AX3000 AX3000 - User's Manual 73 is turned-off, so the current TCP/IP connections remain active as far as the server is concerned -

Using the AX3000 74 AX3000 - User's Manual 4.7 - AX3000 HOT-KEYS The AX3000 hot-keys are listed in the following table. (These hot-keys are l

Installing under UNIX/LINUX AX3000 - User's Manual 75 CHAPTER 5 --- INSTALLING UNDER UNIX/LINUX

8.1.1 - Setting-Up an RDP Session ... 157 8.1.2 - RDP Additional Parameters ...

Installing under UNIX/LINUX 76 AX3000 - User's Manual This chapter covers AX3000 installation under Unix/Linux. 5.1 - TEXT MODE SESSION (TCP/

Installing under UNIX/LINUX AX3000 - User's Manual 77 - Connection Properties: pressing <Space> displays a dialog box which allows cert

Installing under UNIX/LINUX 78 AX3000 - User's Manual Main characteristics of a tty session: - Pre-defined allocation of pseudo-terminals (pt

Installing under UNIX/LINUX AX3000 - User's Manual 79 The Axel SSH client is compliant with OpenSSH 1.5. To accept Axel SSH connections, the

Installing under UNIX/LINUX 80 AX3000 - User's Manual 5.1.3 - Selecting the Emulation The available emulations are: ANSI SCO OPENSERVER UN

Installing under UNIX/LINUX AX3000 - User's Manual 81 5.1.4 - Customising the Emulation Various emulation parameters can be modified but gene

Installing under UNIX/LINUX 82 AX3000 - User's Manual - Wrap: behaviour of the AX3000 when the cursor reaches the last column of the screen:

Installing under UNIX/LINUX AX3000 - User's Manual 83 - Custom: any character can be replaced by the Euro symbol within the current character

Installing under UNIX/LINUX 84 AX3000 - User's Manual Within the 'Session Profile' box, select 'User-Defined Keys' and pr

Installing under UNIX/LINUX AX3000 - User's Manual 85 Note: for the 'Backspace' key and the numeric pad dot, a toggle is only avail